Shanghai UPG International Trading Co., Ltd

Model Number: WJ 100-1800 Key Specifications/Special Features: Design speed: 100rpmEconomic speed: 80rpmWorking width: 1800mm Production line length: about 50m (exact length according to the ground drawing)Note: roll paper which is used to test the production speed should meet following requirements:Grade: minimum B Moisture content: 11% ±1%

Face paper: 90-110gsm²

Liner paper: 110-120gsm²

Corrugated paper: 105-180gsm²

Flute profiles: A, B or according to client's requirements

Steam requirements:

1. Steam quantity: 2000kg/hour
2. Maximum pressure: 1.3MPa
3. Normal pressure: 0.98-1.12MPa
4. Electricity: 380V at 50Hz three-phase or four phase
5. Whole power: 180kW
6. Machine prime power: 120kW (will according the drawing)
7. Shop area that machinery requests: about (length) 47 x (width) 8.2 x (height) 4.5m
8. Equipment direction: left or right transmission will be according to client's requirements

Note:

1. Steam heating system: one set of boiler of 2000kg/hour, pressure 0.98-1.3MPa
2. Steam pipelines above valves and steam back, water drainage pipelines
3. Compressed air pipelines, glue pipelines
4. Power, electrical wire to operation box
5. Water pipelines, water barrel
6. Water, electricity, steam ground foundation
7. Raw material (paper roll, corn starch, caustic soda and sodium borax) to test machinery
8. Engine oil, lubricating oil, hydraulic oil, lubricating and high-resisting lubricating
9. Installation and commissioning persons accommodation and person arrangement